Small HTPC Build

16. December 2017 17:19 by Cameron in   //  Tags: , , , , , , , ,   //   Comments

I recently have had the itch to build a small PC that can fit in my entertainment center. This is mainly so I can play games that require wired controllers without having to provide 30ft long USB extension cords to my main desktop. To fit this need, I considered getting an Intel NUC based on the new Apollo Lake Atom processor, but ultimately I decided on an HP Pro 6200 SFF PC. The Intel NUC in the cheapest configuration isn't well suited for all of my current needs. I would have needed a NUC with an i5 or better for decent performance in more graphically demanding applications.

I bought the HP from eBay for a small $30! The original purchase from eBay included an Intel i3 2100 clocked at 3.10GHz and 8GB of DDR3 RAM. I just had to purchase a hard drive separately and then the computer was ready to use! This was an incredible deal which I couldn't pass up. After receiving the PC, I installed my 1TB HDD, upgraded the CPU to an Intel i5 2500 clocked at 3.30GHz, and installed an ASUS NVIDIA GT 1030 2GB low profile GPU. In total, the build cost me about $150 which is just a little more than the Intel NUC I had originally considered.

I wanted the PC to be powerful enough emulate everything from Atari to Wii/PS2/PSP so getting the GT 1030 was a must. I didn't get great performance on the Intel HD 2000 alone. It is important to note that if you're going to do this yourself, you need to consider power consumption and that these OEM PCs don't have standard upgradeable ATX or ITX PSUs. The HP Pro 6200 has a 240W PSU which is below the NVIDIA recommended 300W for a GT 1030. However, I haven't had any issues where the PC struggles with power delivery. The specs for the GT 1030 indicate that the card draws around 30W and my i5 draws around 95W. This leaves ~100W for the other components which should be sufficient. Because the GT 1030 is a low power card, it is also important to mention that it will only run at PCI Express x4 speeds, but this is plenty for light gaming, emulators, and video streaming. If you need full x16 speeds, you should consider building a mini ITX PC or micro ATX PC instead.

The advantage to going the route of old OEM PCs instead of starting from scratch is that you have less costs to get a base PC up and running. To build a similar configuration from scratch, it would easily cost 2-3 times as much, but you do have more options on CPU/mobo than OEM.

I still maintain my primary desktop PC for gaming/work that requires a beefier GPU, but this is a nice secondary PC that fits my needs for multimedia within my entertainment center. I will be creating some captures from the HP soon demonstrating performance of this build in terms of light gaming, Steam in-home streaming, emulators, and video streaming.

HDMI Audio Kext for NVIDIA Graphics - Hackintosh

6. January 2014 22:40 by Cameron in   //  Tags: , , , , , ,   //   Comments

I've been searching for HDMI audio for quite some time for my desktop hackintosh and tonight I found just the right thing! Simply install the kext by running the install.sh script from the dmg image and voila! I have tested my NVIDIA GTX 660 on OS X Mavericks 10.9.1 and it works beautifully! I tried the DSDT editing but I don't think I got it quite right and it wasn't detecting my TV as an audio output device. After I installed the kext, all was good! Note that all volume control must be done through your TV or audio receiver. OS X doesn't support volume control on digital audio devices. Also, I'm not sure if you can use this kext in conjunction with AppleHDAEnabler, but I don't see why this would be a problem. TonyMacx86 should include this in Multibeast as it would make life much easier for those who don't want to mess with their DSDT.

NVAudio-1.0.dmg (27.02 kb)

Month List

Tag cloud